EAN: 6974662352071
Anycubic Kobra 3 V2 3D printer
Meet the Anycubic Kobra 3 V2, a 3D printer that offers precise and fast printing. Its enhanced LeviQ 3.0 automatic leveling system with a 60 mm Y-axis and SG15 bearings guarantees perfect adhesion and flawless first layers, while speeds of up to 600 mm/s² and acceleration of 20,000 mm/s² reduce turnaround time for even the most demanding projects. Thanks to "plug & play", installation and initial startup take less than 15 minutes, while smart features such as resuming printing after power loss, filament detection and timelapse on the built-in 720 p camera ensure continuous and safe operation. The whole thing is complemented by the powerful Anycubic ecosystem, which gives you full control over every printing step.
LeviQ 3.0 automatic leveling
Forget about tedious manual table calibration. The innovative LeviQ 3.0 system with a 60 mm Y-axis and SG15 bearings on the X-axis takes care of the perfect alignment of each layer. Thanks to the elimination of offsets in the Z-axis, you will get reliable adhesion of the first layer, which significantly increases the success rate of prints even on the most geometrically complex projects.
Express speed and reliable performance
You no longer have to wait long to print your designs. The Kobra 3 V2 achieves a maximum print speed of up to 600 mm/sec (300 mm/sec by default) and acceleration of up to 20,000 mm/sec², resulting in a small boat model in less than 13 minutes. The improved nozzle effectively minimizes filament leakage, and the optimal width of the working tunnel ensures comfort when working on any project.
Unpack and run
Assembling and starting the printer takes less time than your morning coffee - the intuitive, simplified design allows you to start your first print in a quarter of an hour after unpacking. Sturdy twin pull bolts, a precision bearing system and a metal quick-release coupler guarantee the stability of the entire design and allow for instant nozzle changes when needed.
Smart monitoring and security
Anycubic Kobra 3 V2 has a filament sensor that detects its condition and automatically refills it. In addition, the printer resumes operation after a power outage or unexpected power loss. The built-in 720p timelapse camera allows you to document the entire process, which is great for order presentations or creating social media content.
Full control in the Anycubic ecosystem
With Anycubic Slicer Next (based on the Orca engine), you'll prepare models for printing from the LAN, managing multiple projects simultaneously and skipping unwanted elements. Using Anycubic, you gain remote access to the printer, real-time progress monitoring and a time-lapse photography option. In addition, the Makeronline platform offers a rich library of pre-made models and one-click cutting and printing.
Comprehensive feature set
Anycubic Kobra 3 V2 is more than a printer. It's a tool that integrates top-notch automation and intelligent software. With a capacitive 4.3-inch touchscreen and control via panel, app and USB, you have complete freedom to choose how and where to work on your projects.
Included
- Kobra 3 V2 printer
- print head
- touchscreen
- spool holder
- cable holder
- cleaning wiper
- screw M2x14 x2
- screw M3x6 x4
- screw M4x16 x2
- screw M3x10
- screw M3x8
- power cord
- cable organizer x2
- USB disk
- filament tube
- set of wrenches
- allen screws 4.0, 3.0, 2.5, 2.0, 1.5
- sample of filament
- nozzle cleaner
- grease
- camera
- instruction manual
| Manufacturer | Anycubic |
|---|---|
| Model | K3V2-IP-O |
| Weight | 9.37 kg |
| Supported materials | Kobra 3 V2 supports only PLA, TPU, PETG, ABS materials |
| Dimensions | 452.9 x 504.7 x 483 mm |
| Power source | 400 W |
| Multicolor printing | For multicolor printing, the ACE Pro is required |
| Nozzle | Maximum temperature 300℃ |
| Print size | 255 x 255 x 260 mm |
| Maximum table temperature | 110℃ |
| Maximum print speed | 600 mm/sec |
| Touch screen | 4.3-inch |
| Active drying | ACE Pro required |
| Auto leveling mode | LeviQ3.0 + no Z-axis offset + design optimization |
| Nozzle diameter | Standard 0.4mm, options: 0.25/0.6/0.8mm |
| Filament detection and print resume | Automatic filament replenishment |
| Resume after power loss | Supported |
| Video monitoring | Standard HD camera, supports 720P |
| Timelapse mode | Supported |
| AI detection | Print error ("spaghetti") detection |
| Object skipping and area leveling | Supported |
| Local network mode | Supported |
| Control and printing methods | Printer, Anycubic Slicer Next, Anycubic application, USB (print only) |
Note: Product descriptions are automatically generated based on the information provided by our suppliers.
Despite our care in presenting the content, translation errors or inaccuracies may occur.
If you have any doubts, please contact us before making your purchase.
Thank you for your understanding.
