EAN: 5907085528656
RainPoint Digital Water Flow Meter
The RainPoint Digital Flow Meter combines the highest precision with a rugged, waterproof design, offering four measurement modes (flow rate, last consumption, two total counts), while operating on a single CR2032 battery power supply with an easy-to-read indicator display indicating its state of charge. Intuitive controls allow you to rotate the display and switch between units, as well as reset data with a single button hold. An automatic screen shutdown after a minute of inactivity and the ability to measure flow in both directions add to the convenience of use. RainPoint is ideal for the garden, RV, sprinkler or pool.
Precision and reliability in every detail
The RainPoint digital water flow meter is equipped with an advanced Hall sensor and a special IC (Integrated Circuit, chip) chipset, which guarantees a measurement accuracy of ą3%. As a result, you get reliable data on current water consumption, regardless of the conditions and type of installation. No restrictions on the direction of flow and the ability to freely change the orientation of the screen are features that elevate this meter above standard competitive products.
Full protection against moisture
RainPoint cares not only about accuracy, but also about durability. A waterproof battery compartment with an anti-leak seal and silicone ring guarantees the device's long life and resistance to outdoor conditions (IPX6 protection class). Rain, splashes or accidental immersion are no obstacle for it.
Full control of the measurement
The meter offers four independent reading modes: current flow rate, last consumption (last), as well as two total counters (total 1 and total 2). Thanks to the extensive functionality, you can track short-term and long-term data, compare consumption over different periods and plan savings. Want to start a new set of measurements? No problem! Just hold down the menu button and all values will be reset to zero. What's more, RainPoint does not dictate the direction of the flow - you can treat both the water inlet and outlet as an input, and change the direction of the reading with a single button hold if necessary.
Battery power
RainPoint is powered by a single CR2032 battery - it takes just a few seconds to replace it as needed. When the power level drops, a clear warning symbol appears on the display to remind you to replace the battery. When you don't use the meter for more than a minute, its screen automatically goes blank to protect the battery. This keeps the RainPoint working longer, even under heavy use.
Ergonomics and intuitive operation
You can rotate the LCD (liquid-crystal display) with a short press of a button to always read the data easily, regardless of the mounting method. On the flow measurement side, holding down the menu key allows you to change units from GAL/min to L/min, and from GAL to L, making the device universal for different measurement systems.
| Manufacturer | RainPoint |
|---|---|
| Measurement accuracy | ą3% |
| Waterproof | IP54 |
| Reading modes | Current flow rate, last consumption (last), two total counters (total 1 and total 2) |
| Operating pressure | 0.5-10 bar (7.25-145 psi) |
| Measurement range | 0-9999 L |
| Water flow range | 0.5~45.5L/Min |
| Power supply | Battery operated (one CR2032 battery) |
| Operating temperature | 5℃-40℃ |
| Display | LCD |
Note: Product descriptions are automatically generated based on the information provided by our suppliers.
Despite our care in presenting the content, translation errors or inaccuracies may occur.
If you have any doubts, please contact us before making your purchase.
Thank you for your understanding.
