EAN: 6924843231367
ULTENIC Pooleco 30 Pool Cleaning Robot
The ULTENIC Pooleco 30 is a modern, cordless robot designed for comprehensive pool cleaning. The device features three operating modes, an intelligent route-planning system, control via a mobile app, a filter with a 180 μm filtration rating, and a spacious 3.5-liter debris basket. The robot effectively cleans the pool floor, walls, and waterline, and its operating time is adjusted according to the selected mode—up to 180 minutes in floor cleaning mode, 120 minutes in automatic mode, and 90 minutes when cleaning the walls and waterline. Additional advantages of the device include an automatic docking system, IPX8 water resistance, and an efficient three-motor system that delivers a water flow rate of approximately 20,800 l/h.
Cordless design for complete freedom
The absence of cords means greater convenience and no more problems with tangled cables. The robot can move freely along the pool floor and walls, reaching hard-to-reach areas. This solution not only increases cleaning efficiency but also reduces the time spent on pool maintenance and care.
Effective cleaning of the pool floor, walls, and waterline
The ULTENIC Pooleco 30 is designed to thoroughly remove various types of debris. The robot collects leaves, dust, fine gravel, twigs, blades of grass, and hair, helping to keep the water perfectly clean. The automatic waterline detection feature ensures the device effectively removes debris even from areas particularly prone to buildup.
Smart navigation adapted to the pool’s shape
An advanced route-planning system allows the device to navigate effectively across both simple and more complex surfaces. The “S”-shaped route mode ensures thorough cleaning of flat pool bottoms, while the adaptive mode increases cleaning efficiency in irregularly shaped pools. As a result, the robot minimizes the risk of missing specific areas and thoroughly covers the entire surface.
Three operating modes tailored to specific tasks
The robot is equipped with three independent operating modes that can be adapted to your current needs. Automatic mode enables comprehensive cleaning of the bottom, walls, and waterline for up to 120 minutes. The bottom-cleaning mode operates for up to 180 minutes, while the mode designed for cleaning the walls and waterline provides up to 90 minutes of continuous operation.
Efficient filtration system and large debris basket
The 3.5-liter filter basket is equipped with a 180-micrometer filter that traps even very fine debris. As a result, not only leaves and twigs but also sand, pollen, and other sediment end up in the container. The larger bin capacity means it needs to be emptied less frequently, resulting in greater convenience.
High Performance and Efficiency
Three powerful motors ensure the robot operates smoothly, providing a water flow rate of approximately 20,800 liters per hour. This high performance allows for the quick and effective removal of debris from various pool surfaces. The device’s special design also makes it easier to navigate around obstacles such as drains, steps, or uneven areas on the pool floor.
Convenient management of settings via the app
Before submerging the device in water, you can connect the robot to the mobile app and customize its settings to suit your needs. You can select the appropriate operating mode, check the battery charge level, and install OTA system updates. This solution allows you to quickly prepare the device for operation and conveniently manage its functions.
Automatic docking and easy maintenance
After completing a cleaning cycle or detecting a low battery level, the robot automatically stops at the pool wall. This feature makes it much easier to remove the device from the water and reduces the time needed to prepare it for the next use. The manufacturer has also ensured convenient access to the filter basket, which can be quickly removed and rinsed under running water.
Durable construction and broad compatibility
The housing, which meets IPX8 standards, provides effective protection for the components against water exposure. The robot is designed to operate on surfaces made of concrete, fiberglass, vinyl, and ceramic tiles. The device works well in both rectangular and round pools, as well as in pools with more irregular shapes.
Included in the set
- ULTENIC Pooleco 30 pool robot
- Filter basket
- Power adapter
- Quick start guide
- User manual
- Hook for removing the device from the water
| Manufacturer | ULTENIC |
|---|---|
| Model | Pooleco 30 |
| Device type | cordless pool cleaning robot |
| Application | pool floor, walls, and waterline |
| Water resistance rating | IPX8 |
| Number of motors | 3 |
| Water flow rate | approximately 20,800 l/h (20.8 m³/h) |
| Filter basket capacity | 3.5 l |
| Filtration precision | 180 μm |
| Control | Mobile app |
| System updates | OTA |
| Automatic cleaning mode | 120 minutes |
| Pool floor cleaning mode | 180 minutes |
| Pool walls and waterline cleaning mode | 90 minutes |
| Automatic docking function | Yes |
| Supported surfaces | Concrete, fiberglass, vinyl, ceramic tiles |
| Supported pool shapes | Rectangular, round, kidney-shaped, and irregular |
Note: Product descriptions are automatically generated based on the information provided by our suppliers.
Despite our care in presenting the content, translation errors or inaccuracies may occur.
If you have any doubts, please contact us before making your purchase.
Thank you for your understanding.
