EAN: 6975843749345
Wybot Winny 200 wireless pool cleaning robot
Wybot Winny 200 is a wireless robot designed for automatic cleaning of above-ground pools with an area of up to 60 m². It stands out with its operating time of up to approximately 80 minutes and filtration capacity of 7.5 m³/h. Powered by a 3200 mAh battery, it eliminates the need for cables, which increases convenience and safety of use. Its compact design and weight of 3.3 kg make the robot easy to carry, and its IPX8 waterproof rating allows for trouble-free operation when submerged up to 2.5 m.
Effective cleaning and enhanced suction power
The robot is equipped with an improved suction system with a power of up to 30 W, which enables effective collection of sand, leaves, and small debris. The design prevents debris from backing up, so once sucked up, the dirt remains in the device without the risk of being released back into the water. What's more, with a speed of approximately 16 m/min, the Winny 200 effectively covers the entire area to be cleaned.
Two-stage filtration system
The Winny 200 uses a two-stage filtration system consisting of a foam filter and a 180 µm density tray. This combination effectively captures both larger debris and fine particles. The filter is also easy to remove and clean – you can simply rinse it with water.
Intelligent parking at the edge of the pool
The smart sensor technology means that when the battery is low, the robot automatically heads towards the pool wall and stops near it. This, combined with the hook included in the set, makes it easy to remove the device from the water.
Wireless convenience and simple operation
Operating the robot has been simplified as much as possible – just press the button and immerse the device in water to automatically start cleaning. In addition, the wireless design eliminates the need for cables and any range limitations. Relax and watch Winny 200 do the cleaning!
Lightweight design, long operating time, and fast charging
The low weight and integrated handle make it easy to carry the robot, and the operating time of up to approximately 80 minutes is sufficient to thoroughly clean even a large pool – up to 60 m². The robot charges in about 4 hours, and the built-in LED indicator shows the charging status.
Included in the set
- Cleaning robot
- Filter basket (foam + 180 µm filter)
- Handle and grip
- Scraper x2
- Hook for removing the robot from the water
- Screws
- Charger
- User manual
| Manufacturer | Wybot |
|---|---|
| Model | Winny 200 (HJ102P) |
| Operating voltage | 11.1 V |
| Power | 30 W |
| Operating time | Approx. 80 min |
| Charger input voltage | 100–240 V |
| Charger frequency | 50/60 Hz |
| Adapter output voltage | 12.6 V |
| Charger output current | 1 A |
| Battery capacity | 3200 mAh |
| Charging time | Approx. 4 h |
| Maximum pool area | 60 m² |
| Filtration capacity | 7.5 m³/h |
| Filtration type | Two-stage |
| Travel speed | Approx. 16 m/min |
| Ingress protection class | IPX8 |
| Water temperature | 10°C to 35°C |
| Charging temperature | 5°C to 35°C |
| Maximum water depth | 2.5 m |
| Dimensions | 330 × 308 × 228 mm |
| Weight | 3.3 kg |
| Storage temperature | -20°C to 45°C |
Note: Product descriptions are automatically generated based on the information provided by our suppliers.
Despite our care in presenting the content, translation errors or inaccuracies may occur.
If you have any doubts, please contact us before making your purchase.
Thank you for your understanding.
