EAN: 6930460004574
SkyRC MC3000 AA / AAA charger
The MC3000 charger was born out of SkyRC's need for a versatile, precise and powerful charger tailored for single-purpose cylindrical batteries. With this product, you will no longer experience problems with cages, wiring, terminals and other DIY solutions.
Unique charger
MC3000 was designed out of the need for a versatile, precise and powerful SkyRC charger tailored for single-target cylindrical batteries. With this charger, you will no longer experience problems with cages, holders, cumbersome wiring, clamps and similar DIY solutions. The MC3000 is customized for a wide range of sizes (over 42) and types (over 7) of batteries that charge at 3 A and discharge at 2 A.
Functionality and safety
The charger has 6 modes of operation - charging, discharging, refreshing, forming (for NiMH, NiCd, Eneloop only), charge-discharge cycle and storage (for Lixx only). Rubber feet and a 10° tilt allow a better view of charging and increase cooling efficiency at the bottom of the charger. Charger safety is ensured by multiple types of limits - time, voltage, capacity, etc.
Efficient cooling
Built-in two aluminum fans effectively get rid of the heat generated by the charger. The cooling ensures efficient air exchange, even at low operating speed.
Easy-to-read display
The 128x64 pixel screen shows 5 different work tabs. 8 Buttons guarantee simplicity of programming and operation of the device. 4 numbered buttons represent the corresponding battery slot. The remaining buttons are used to operate the charger. The device allows you to save up to 30 charging profiles, which can be called up and used for the current charge at any time with a few clicks.
Included:
- Charger
- Power adapter
| Manufacturer | SkyRC |
|---|---|
| Model | SK-100083-02 |
| Charging current | 0.05 A - 3 A |
| Delta Peak | 1 - 20 mV |
| Discharge current | 0,05 - 2 A |
| Battery capacity | 500 - 50000 mAh |
| Number of cycles | 1 - 12 |
| Final charging current | 100 mAh |
| Operating temperature | 0°-40°C |
| Supply current | 12 V / 2.5 A |
| USB current | 5 V / 2.1 A |
| Weight | 600 g |
| Dimensions | 200 x 124 x 69 mm |
Note: Product descriptions are automatically generated based on the information provided by our suppliers.
Despite our care in presenting the content, translation errors or inaccuracies may occur.
If you have any doubts, please contact us before making your purchase.
Thank you for your understanding.
