X-Sense

X-Sense XC0C-iR Wi-Fi carbon monoxide detector

Ref: XC0C-iR

23,89€

.
Promotional code:

White

Notify me when the product is available
  • Description

    EAN: 0810194780691

    X-Sense XC0C-iR Wi-Fi carbon monoxide detector


    The X-Sense XC0C-iR is a Wi-Fi-enabled carbon monoxide detector that combines classic home protection with instant notifications on a mobile app. In the event of an emergency, it notifies you with a loud alarm, a clear message on the screen and an alert on your phone, allowing you to react even when no one is home.



    Carbon monoxide detector mounted on a wall in a bright room with CO icons floating prominently.

    In-app notifications


    When connected to the X-Sense Home Security app, the sensor sends real-time notifications, showing the current CO concentration in ppm during an alert. The app also notifies you of pre-alerts, low battery levels and possible device malfunctions, and allows you to view your carbon monoxide alarm history. It is possible to share the sensor with other household members, so that alert notifications go to several people at once. A 2.4GHz Wi-Fi connection is required for the smart function to work.



    Woman outside looking anxiously at phone, next to graphic showing CO detector and alert notification

    Two-stage alerting


    The XC0C-iR supports two warning levels - a preventive alarm and a full CO alarm. When the concentration of carbon monoxide is elevated, but has not yet reached the alarm threshold, you will receive an alert in the app. If the CO level persists longer, the sensor enters full alert mode, sounding a beep and sending another notification.



    Close-up of the side buttons of the carbon monoxide detector

    Precise CO measurement.


    The high-performance electrochemical CO sensor provides accurate and stable measurements of carbon monoxide concentration. The device meets the requirements of EN 50291-1:2018, which means that the alarm triggers at specific time intervals depending on the level of CO detected.



    Top of carbon monoxide detector with PEAK button highlighted

    Easy-to-read display and signaling


    The backlit LCD display shows the current CO concentration in ppm, allowing quick assessment of the situation without reaching for the phone. It is complemented by LED signaling that indicates the device's operating status, alarm, battery problems or malfunction.



    Carbon monoxide detector with LCD display showing CO concentration at 300 PPM

    Loud local alarm


    When a dangerous concentration of carbon monoxide is detected, the sensor triggers an audible alarm with a volume of at least 85 dB. The signal is clearly audible, so it warns occupants of the house even while they are sleeping.



    Two carbon monoxide detectors, one in the foreground, the other blurred in the background

    One-click silencing


    The alarm can be silenced locally with the Test/Silence button or remotely in the mobile app when the situation is checked and deemed safe. The mute function works temporarily, after which the sensor automatically returns to normal standby mode.



    Three carbon monoxide detectors floating on a blue background

    Flexible mounting


    The sensor can be placed on a flat surface or mounted on a wall using the included mounting hardware. It is recommended that the device be placed in an area where the occupants of the house are in daily life - away from obstacles that may restrict the free flow of air, so that detection is as effective as possible.



    Two carbon monoxide detectors - one mounted on the wall, the other set on the dresser next to the books

    Exceptional durability


    The device has an expected lifespan of up to 10 years. Power is provided by a replaceable battery, and a notification system alerts you to low power, malfunction or end of life, allowing you to maintain the highest level of security.



    Carbon monoxide detector lying on a bright background with a graphic symbol of a microprocessor


    Included:


    • Carbon monoxide detector
    • CR123A 3 volt battery
    • Mounting screw x2
    • Spacer pin x2
    • Supporting label for hole spacing
    • User manual


     







    ManufacturerX-Sense
    ModelXC0C-iR
    Power supply1 × CR123A 3 V battery (replaceable)
    Battery lifeUp to 1 year (when tested once a week)
    Product lifetime10 years
    Sensor typeelectrochemical
    Safety standardsEN 50291-1:2018
    CO alarm response time.50 ppm: 60-90 minutes
    100 ppm: 10-40 minutes
    300 ppm: 0-3 minutes
    Operating temperature4.4 to 37.8°C
    Operating humidity10 to 85% RH (non-condensing)
    Alarm volume≥ 85 dB from a distance of 3 m
    Alarm silencing time≤ 9 minutes
    Wi-Fi operating frequency2400-2483.5 MHz
    Maximum RF power100 mW
    Weight148 g
    Dimensions142 × 75 × 32 mm

    Note: Product descriptions are automatically generated based on the information provided by our suppliers.

    Despite our care in presenting the content, translation errors or inaccuracies may occur.

    If you have any doubts, please contact us before making your purchase.

    Thank you for your understanding.

  • Shipments

    We guarantee safe, fast, and reliable shipping. The estimated shipping date is indicated on each product page.

  • Returns

    We accept returns within 15 days of receiving your order. Items must be returned unused and in their original packaging.

  • Payment method

    We accept payments by credit card (Visa, MasterCard), Multibanco, MB WAY, etc. All payments are processed securely.

  • Guarantee

    We offer a full warranty on our products. For more details, please see our Terms and Conditions.

X-Sense XC0C-iR Wi-Fi carbon monoxide detector
X-Sense XC0C-iR Wi-Fi carbon monoxide detector
X-Sense XC0C-iR Wi-Fi carbon monoxide detector
X-Sense XC0C-iR Wi-Fi carbon monoxide detector
  • X-Sense XC0C-iR Wi-Fi carbon monoxide detector
  • X-Sense XC0C-iR Wi-Fi carbon monoxide detector
  • X-Sense XC0C-iR Wi-Fi carbon monoxide detector
  • X-Sense XC0C-iR Wi-Fi carbon monoxide detector