The Tech-Protect FlexAir Hybrid MagSafe + Glass Fit+ 2-Pack is a hybrid TPU+PC case with a built-in MagSafe ring and two tempered glass screen protectors. The FlexAir Hybrid case combines flexible TPU sides with a hard PC back—a flexible frame absorbs impact during drops, while a polycarbonate back effectively protects against scratches. The transparent design showcases the phone's original design, while raised edges around the screen and camera island protect sensitive areas from contact with the surface.

The built-in MagSafe magnetic ring allows you to use wireless chargers, car mounts and other magnetic accessories without removing the case.

Glass Fit+ tempered glass with 9H hardness and 0.3 mm thickness with 2.5D edges and an oleophobic coating protects the display against scratches while maintaining full touch sensitivity and crystal clarity.

* Due to the varying milling patterns of display edges, a slight air halo may appear around the screen after installing a screen protector. This is natural and depends on the milling pattern of the screen in a given unit.

• 100% Original
• Packed in original packaging
• FlexAir Hybrid case: TPU (sides) + PC (back) – hybrid protection
• Built-in MagSafe ring – magnetic chargers and accessories
• Transparent back – highlights the original look of the phone
• Raised edges – screen and camera protection
• Precise cutouts – access to ports and buttons
• Glass Fit+: 9H, 0.3mm, 2.5D edges, oleophobic coating
• Crystal clear – no impact on display quality

1 × Tech-Protect FlexAir Hybrid MagSafe Case

2 × Tech-Protect Glass Fit+ tempered glass

2 × Installation kit

1. Begin installation in the bathroom right after taking a shower – the water vapor will absorb all the dust from the atmosphere and will not interfere with the installation.
2. Thoroughly clean and degrease the screen surface, then use a dry cloth to polish it to a shine.
3. Install the glass as evenly as you can – you can position it using two leaves, gluing them to the side of the device.
4. Get rid of air bubbles by pressing the whole thing firmly in circular motions for several dozen seconds – do this so that the adhesive layer bonds with the screen as strongly as possible.