Tech-Protect Glass UV+ is tempered glass with a UV coating. Ultraviolet light-curing adhesive technology ensures the glass adheres perfectly to the screen, maintaining full transparency and touch sensitivity. The set includes two pieces of glass and a UV lamp, ensuring your device is protected from day one.

The glass achieves a Mohs hardness of 9H, providing effective protection against keys, coins, and other pocket items. The 0.3 mm thickness maintains your smartphone's slim profile and doesn't affect touchscreen responsiveness. The material absorbs impact energy, protecting the display from cracks even during falls. UV technology also covers the curved edges of the screen, eliminating air bubbles.

The oleophobic coating reduces the visibility of fingerprints and makes the surface easier to clean. Images remain crystal clear with accurate color reproduction, while the smooth glass surface preserves precise gestures and smooth scrolling. After installation, remember to re-enroll your fingerprint to ensure the in-screen fingerprint reader works optimally with the new protective layer.

* We do not recommend using 3D glass without any housing.

** We do not recommend using glass if the case overlaps the edges of the screen too much, there is a risk of prying it off.

***The functionality of the in-screen fingerprint reader may be slightly impaired if a protective film or glass coating is installed. The fingerprint reader is not fully compatible with additional coatings.

• 100% Original
• Packed in original packaging
• Application with a UV lamp
• Glass hardness 9H
• Only 0.3 mm thick
• Oleophobic coating to reduce fingerprints
• Full coverage of curved edges

2 × Tech-Protect Glass UV+ tempered glass

1 × UV lamp

2 × Installation kit

1. Start the installation in the bathroom right after taking a bath - the water vapor will absorb all the dust from the atmosphere and it will not interfere with the installation.
2. Thoroughly clean and degrease the screen surface, then use a dry cloth to polish it to a shine.
3. Use the ribbon from the kit to seal the speaker.
4. Connect the UV lamp to a power source using the Type-C cable.
5. Pour the liquid into the center of the device.
6. Install the glass as evenly as you can, you can also correct this step before the surface hardens when the liquid is on the screen together with the glass.
7. If an air bubble appears, use a bank card and gently push it out of the glass, this step is done before hardening.
8. Using a UV lamp, harden the glass along the center in five places for 15 seconds each and then around the edges for 10 seconds each.
9. Clean your phone of any remaining hardened glue.
10. If your device has a fingerprint reader in the screen, remember to remove and re-add your fingerprints after installing the screen glass.
11. Enjoy a job well done!